Constructed as follows:
Shape, sizes and moldings as shown in the drawing.
Coupling with 3/4 ”threaded tube, is bolted to the structure, including sealing ring for watertight locking.
The threaded tube, nuts and bolts at the top of the structure are hidden by an ornamental aluminium bush.
The inner part bares the aluminum ring on which the LED motor is mounted.
The ring is hinged to the structure and is closed by means of a stainless steel screw.
It is also fitted with a neoprene gasket which guarantees IP65 protection.
Lantern in compliance with EN 60598-1; EN 60598-2-3; EN 62031;
EN 55015 EMC; EN 61547 EMC; EN 62471
Made as a single aluminum block which guarantees the dissipation of the heat emitted by the LED diode.
Optics based on IP67 LEDiL printed lenses, resistant to UV rays and IK10 shocks, with high precision collimators for concentration of the light beam.
The circuit is painted with special insulating paint powder which increases protection from electrostatic discharges.
IP67 optics with watertight gasket for the protection of LED circuits are mounted on the dissipation structure.
The whole LED motor is fixed to the lower body of the luminiere by means of six M4 stainless steel screws.
The LED motor remains easily removable for any maintenance operations.
Programmable electronic power supply for LED module.
LED module UP TO 130W 1.2340 lumen 3000 or 4000K .
Terminals for wires with a max. section of 2,5 mm2
Separate electronic driver from LED module, individually replaceable.
Voltage Frequency P. Rating IP CL II CL I Operative Temp.
120-277V 50-60 Hz 66 > 0.9 -30°C...+40°C
Electrical components on a removable plate.
Automatic disconnector when opening.
Antique color EUROCOMITALIA or other RAL color on request See painting specifications.
Surface protection: See specifications on material protection.
Assembly: See assembly specifications.